Matsui – UH
Universal header “UH” is a pipe line switching device for raw material conveying.
- Features
-
- Units are just stacked up, assembled and device is completed.
- Able to change the system easily.
- No galling due to levitation sliding of switching core.
- Able to minimize abrasion by sliding.
- Able to counter measure contamination from abrasion powder.
Matsui – FPD
Since this equipment gives air vibration wave to pellets (regrind material), powder which sticks and mixes with pellet is separated efficiently from pellet. It collects powder only. A dust box collects the separated powder at a fixed interval. Since it supplies clean pellet without powder mixture, molding product with little contamination is made possible.
- ● It gives vacuum air vibration wave of 10～20Hz frequency to pellets (regrind material) which is made to flow and separates powder which mixes with material.
- ● Only separated powder is picked up and collected by a dust box.
- ● Since it performs dust collection, it is possible to supply fine pellet without powder mixture.
Matsui – DP
DP is the pressure switch that operates by detecting changes in vacuum pressure making it possible to convey materials without any wiring of signal lines.
A new system that sends signals controlled by changes in vacuum pressure. (Registered patents: No. 3790373, 3803791, Patents pending: 2)
Matsui – Feedenser
Decreased wind volume, low operating cost, updated conveying and distributing technique.
- Powder like resin, PVC and wheat flour etc. conveyed in the form of layers resembling plus that filled up the hose, which air-consumes only 1/15-1/50 of that of Roots · Turbo Blower, drastically lowering the running cost.
- It is ok for small piping diameter and set.
- Little separation of the mixture, no pellet, no Flake damage, and effective static electricity prevention.
- Close system that produce little conveying noise and improve environment quality effectively.
Matsui – APH
The collection unit provides powered dust removal and mixing by using airflow power. Charge volume can be adjusted for various types of injection-molding machines. Built-in valve structure reduced loads applied to the unit.
- 1.The built-in hanging type flap damper prevents binding and improves the dust removal mixing performance.
- 2.The built-in hanging type flap damper prevents binding and improves the dust removal mixing performance.
- 3.The built-in hanging type flap damper prevents binding and improves the dust removal mixing performance.
- 4.Patent No.3767993, 3754129(Already registered)
Matsui – SFD-HT
It attaches the drum which is used in the process line to the feedenser and reverses it and conveying material in the drum.
- Features
-
- High density feeding of powder and granules.
- High density is effected at low speed by pressure feeding to reduce damage to the materials.
- The material stored in drums is combeyed as it is without changing the container.
- Even ordinary drums that have not been made sanitary can be used for hygienic conveyance by inserting a plastic bag into the drum.
Matsui – PLP
Matsui’s “Pellet Liner” (PLP) is of only 16mm in diameter. (Super high polymeric volume PE tube. Inner diameter: 13 mm; Outer Diameter: 16mm) PLP supports small volume of conveyance, saves space and allow great flexibility. PLP helps to create a clean and easy to maintain factory.
- Compact
- Sectional area of PLP’s tube (φ13) is only 1/8 of regular PVC hose（φ38）. It is highly flexible and does not take up space.
- Stable Conveyance
- Uses ultra high molecular weight polyethylene tube that is resistant to friction and has a smooth surface for excellent conveyance.
- Reliable
- Prevents absorption of moisture on the molding machine as it conveys only a small amount (100g-200g) at one time.
Matsui – ST
The conveyor aims to attain high-operability and miniaturisation as a result of pursuing optimal performance for granule conveyance.Equipment such as large filters and exhaust ducts are unnecessary.
Conveyance of powder and granules is conducted at low speed using a suction and damage of material is therefore kept at a low level.
The conveyance tank has a simple structure.
As a suction system is employed, there is no drop in air pressure at the reception point and stable conveyance is maintained at the hopper.
The suction hopper section has a cylindrical structure and uses a large diameter exhaust damper, this design reduces bridging to a minimum.
Matsui – JL4
JL4 is a vacuum type loader that feeds materials automatically. Adequate receiving hopper can be chosen accordingly to support from 2 to 6 ends of the conveyor belt.
- 1.Compact
- Equipped with blower, control panel, dust collector and dust box functions, maximises the use of limited space in factories.
- 2.Easy Maintenance
- – The large dust box reduces the frequency of maintenance. Accumulated dust can be easily disposed by removing the cap. (V-Type)
– The cyclone typed dust separator fixed in front of the filter reduces the need for maintenance of filter and supports long hours of stable conveyance. - 3.Environment Friendly
- Minimised metallic and conveying noises to less than 80db.
Matsui – DMZ2
DMZ2 is a dehumidifying dryer that supplies stable dry air of low dew point, -40°C. As it is unnecessary to replace the absorbent material, performance is being maintained like that of first usage.
- 1.Reliable
- Uses honeycomb rotor that ensures stable low dew point (-40 ゜C) drying condition and functionality like that of first usage even without replacement of absorbent materials.
- 2.Saves Energy
- Enhanced with dehumidifying effect, consume 30% less energy than hot air dryers.
- 3.High performance
- Matsui’s original hopper disperses hot air evenly and prevents excessive drying of materials.
D5 Creation