Matsui – TRIA Granulator
Soundproof customer engineered products.
(A User and Environment Friendly product)
- ●Noise insulation
●Fail safe
●Attained the CE marking. Verified to have cleared the requirements in terms of safety level, hygiene, noise and electromagnetic waves.
Matsui – PF72
A hybrid between a shredder and a granulator, simultaneously doing both jobs at once. The scheduling rotor holds the product feeding it down towards the shredding blade, this ensures that any long, uneven and difficult parts can be shredded and consistently granulated.
This is unlike previous models, which often had blockages and unscheduled granulation
- 1. Improve Granulating Efficiency
- The scheduling rotor provides excellent entrainment, allowing long objects to be folded to fit inside the mechanism.
- Corresponding size L1500mm × W600mm × H230 t = 5mm (approx.)
- 2. Fewer Miss-Cuts
- The scheduling rotor provides no miss-cuts, allowing long items to be cut and granulated without complications. Machine friction is kept at a reduced level and there is less powdered grain.
- 3. Improves Cleaning
- The feeding hopper and casing mill can be opened wide, allowing easier access for cleaning.
- 4. Low Noise
- The shredding impact sound has been lessened (26.6rpm/60Hz) during low-speed rotation. The granulating blade has also had its sound levels reduced (106rpm/60Hz).
- 5. High Processing Power
- Granulating Capacity (Approximate) 60 ~ 100kg / h
- 6. Space-Saving
- The two jobs have been realised in one design, ridding the use of a separate machine.
- 7. Safety
- A motor breaker is standard for overload protection. With an
- Two to feeding hopper, one tank, one part of the casing milled, to adopt one of the chain cover interlock limit switch, motor breaker was standard equipment for overload protection.
Matsui – MGL2-102S/102SS
A space-saving device that integrates blending and recycling into the granulator.
Installed next to the moulding machine, recycling of the sprue and runner is accomplished immediately.
- 1. Space-Saving
- Space-saving has been achieved by integrating blending and granulation functions.
- 2. Easy Installation
- The unique DEGIPECA dosing valve is activated by the vacuum, eliminating the need for a signal cable.
- 3. Weighing Synchronous Transport
- New and recycled materials will not separate, but instead are blended together thoroughly.
- 4. Simple and Easy Operation
- The touch screen allows automatic operation by simply entering the mixing ratio and the weight values.
- 5. Easy Cleaning
- The measuring unit is quickly cleaned since it can be removed with a single touch.
- 6. Easy to retrofit to existing equipment
- This system can be used with an existing granualtor. (S Type)
Matsui – P51KG/P71KG
This large low-speed granulator can be easily cleaned in a short period of time. Production can then be resumed immediately, reducing downtime between other grinding requirements. This quiet granulator can be positioned next a moulding machine, allowing defective part granulation.
- 1. Easy Cleaning
- Decomposition and cleaning is possible without the need for special tools. Any unwanted residue inside is easily accessed, because of the large, open granulation chamber.
- 2. Defective Product Granulation
- Granulation of defective products can be dealt with simultaneously alongside production. Granulation capacity (approx.) 20kg ~ 40kg / h
- 3. Space-Saving
- Suitable for a variety of layouts, with it’s compact design.
- 4. Low Noise
- With a low-speed rotation (30rpm/60Hz), the hopper was designed to suppress sound with it’s bouncing vibration damping sheet.
- 5. Safety
- The tank and feeding hopper are both fitted with a interlock limit switch, and the machine is also fitted with a breaker for motor overload protection.
Matsui – SMGL
SMGL is the standard for the low-speed granulators. It’s non-screen construction reduces the formation of powder and mis-cuts thereby giving the end product a uniformed grain size.
- 1.Low Price
- A cost efficient standard model.
- 2.Reliable
- ●With a double bearing which reduces shaft stress and eliminates difficult adjustment, extends lifespan of the machine and makes the exchange of blades and bearing easier. (Pending patent)
●The use of anti-vibration torque arm further extends the lifespan of bearing and reduction gears (by 1.5 to 2 times as compared to previous models). (Patent No.3972049) - 3.Easy Maintenance
- ●Glass panels has been made a standard allowing supervision of granulation.
●Extremely fine materials are prevented from entering the bearing by a dust wiper, a air purge can be used as an alternative. - 4.Safe and Environmental Friendly
- ●2 limit switches are located at the opening and closing part of feeding hopper.
●Motor breaker prevents excessive load.
●Sound proof steel used for feeding hopper reduces noise pollution.
Matsui – MGL2-TPE
MGL2-TPE is a low speed granulator which is easy to clean and maintain, especially made for “Soft materials”. The absence of the screen prevents excessive granulation and mis-cuts, thereby maintaining a size like that of “New Pellet Chip”.
- 1.Reliable
- ●The use of anti-vibration torque arm extends the lifespan of bearing and reduction gear (by 1.5 to 2 times as compared to previous models). (Patent No.3972049)
●The large rotating blade prevents formation of black spots that occurs when runners goes through the casing. - 2.Easy Cleaning
- ●Pivot design allows chamber to be widely opened without any tools. (Patent No.3936385)
●Round bolts that are used for bed cutter, preventing regrind materials from accumulating in the bolt head. - 3.Easy Maintenance
- ●Sight glass has been included as a regular feature for the supervision of the granulation process.
● A dust wiper prevents fine granulated materials from getting into the bearing. Air purge can also be manually used. (Patent No.3966892) - 4.Safe and Environmental Friendly
- ●3 limit switches are located at the opening and closing part of feeding hopper and insertion part of suction box.
●Motor breaker prevents over loading.
●The straight feeding hopper prevents formation of bridge from sprue runners in the hopper.
Matsui – MGL2
A low speed granulator which can be cleaned safely and thoroughly in a single step. The new pivot link structure enhances the access for cleaning.
1.Enhanced Reliability
– Reducing shaft stress, the double bearing eliminates any difficult adjustments, extending the lifespan of the bearing and makes the replacing of blades and bearing easier.
– The use of anti-vibration torque arm extends the lifespan of the bearing and reduction gears, by 1.5 to 2 times as compared to previous models.
2.Easy Cleaning
– The pivot design give a wide open access to the cutting chamber, and can be opened without the need for any tools
– Dome headed bolts are used in the cutter bed, preventing regrind materials from accumulating.
– Also the feeding hopper is gasket free, and eliminates potential misplacement.
3.Easy Maintenance
– Supervision of Granulation can be done so though the sight glass into the mechanism.
– The bed cutter, scraper and crushing bed cutter is accessible from both sides.
– The dust wiper is provided to prevent the granulated materials from getting into the bearing, and an manual air purge is also provided.
4.Safe and Environmental Friendly
– Limit switches are located at the opening and closing part of feeding hopper, and insertion part of suction box.
– Motor breaker prevents excessive load.
– Noise pollution is reduced by the sound proof steel.