Matsui – JC3
![jc3](https://easternplastics.co.uk/wp-content/uploads/2013/08/jc3-150x150.jpg)
Matsui’s JC3 blender is designed for a synchronized measuring without extra required.
- Simple Structure
- Easy Operation
- Easy Changing Master-Batch Colouring Material
- User-friendly and Easy Operation with Touch Panel
Matsui – JCS
![jcs](https://easternplastics.co.uk/wp-content/uploads/2013/08/jcs-150x150.jpg)
JCS is a weight subtraction, synchronized blending system that can be used as a Loss Inn Unit or Batch Blender. A Mixing drum is not required and blending ratio can be pre-set.
- 1. High quality
- As a mixing drum is not required, it eliminates the separation of materials due to differences in weight and static electricity. Also preventing a change of material quality due to heat from abrasion.
Upon setting the volume of one batch as the volume of one shot of molding machine, the precision of blending can be remarkably enhanced.(1 shot approach) - 2. Compact
- The supplying hopper and measuring hopper are combined into one unit and as there is no mixing part, allowing the height of equipment to remain low.
- 3. Reliable
- The quality of the products can be ensured as the machine monitors the measuring and mixing ratios automatically.
Matsui – JCW2-i
![JCW2-i](https://easternplastics.co.uk/wp-content/uploads/2013/08/JCW2-i-150x150.png)
The JCW2-i gravimetric blender is ideal for minimising waste when changing material colour. Matsui has created a more compact and space-saving machine with no reduction in performance. The JCW2-i is part of Matsui’s “iplas” machine set. “Iplas” is a group of intelligent machines with Self-Decision Making capabilities. They make self-assessments which are based on the usage of customer and applies most energy efficient mode to it and can be up to 70% more efficient compared to older models.
- 1. Intelligent mixing
- Feed optimization software coupled with completion forecasting signals reduce resin waste by as much as 99% (“Intelligence” function).
• Automatically regulates flow volumes to suit the molding machine’s status, greatly reducing waste.
• Reduces cleaning time and labor when materials or colors are changed. - 2. More compact and space-saving
- Roughly half the installation footprint
While ensuring a maximum capacity of 145 kg/h
• Integrated measuring and conveyance units used with horizontal screws help achieve downsizing.
• Using smaller batches improves mixture uniformity and supports small lots. - 3. Simple Operation
- User-friendly interactive operation.
- 4. Automatic Operation
- This automatically controlled device keeps the blender at its best performance level at all times. Even when there is a change in material, this device automatically detects and alters the measurement conditions to accommodate the new material.
- 5. Easy Cleaning
- Adhering powder can be easily swept down to the bottom of the hopper, from which remaining materials can be completely removed. The hopper and screw can easily be removed, thus making cleaning up easier.
Matsui – JCW2
![JCW2, Matsui,](https://easternplastics.co.uk/wp-content/uploads/2013/08/jcw2-150x150.jpg)
JCW2 is a compact blender used for high precision mass measurement.
As all materials are discharged downward, operation and maintenance can be carried out at the front and hence, improves working performance.
- 1.Simple Operation
- This machine is very user friendly and easy to use.
- 2.Automatic Operation
- The machine automatically maintains the blender at its highest level of performance. When there is a change in material, the device detects this and changes its parameters accordingly.
- 3.Easy Cleaning
- Adhesion powder can be easily swept down to the bottom of the hopper, from which remaining materials can be completely removed. The hopper and screw can be easily removed thus, making cleaning up easier.
Matsui – MCJ-AA
![MCJ-AA, Matsui](https://easternplastics.co.uk/wp-content/uploads/2013/08/MCJ-AA-150x150.png)
MCJ-AA is a large flow rate, high-pressure, medium temperature controller which can support high temperatures, realised with stable temperature control without compromising the high level of safety.
- High precision~Geared up for high-precision moulding.~
- Monitors temperature with 0.1°C precision whilst the Temperature Controller monitors with less than ±0.5°C precision, and has a 0.25sec of sampling cycle.
- High-reliability
- Heater Control with SSR (non-contact relay)
- Safety~Automated control offers safer operational environment.
- ●Breaker with open-circuit voltage capability to secure a safe operation environment.
●Heater Control with SSR
●Connector lead for alarm signal (Option)
※Enhance further safety with a variety of options. - Without leak
- Using canned pump, bellows valve
Matsui – MCAX
![mcax](https://easternplastics.co.uk/wp-content/uploads/2013/08/mcax-150x150.jpg)
MCAX promotes stable temperature control and high level of safety under high pressure.
- ■Pump Features
- The non-seal design of the canned pump allows MCAX to be used even in clean rooms. Reputed for high precision of temperature control, MCAX is also adequate for use under high pressure and large flow rate.
Matsui – MCM-SC
![MCM-SC](https://easternplastics.co.uk/wp-content/uploads/2013/08/MCM-SC-150x150.jpg)
MCM-SC is the mold temperature controller for compact optical molding which realized stable temperature control and high safety.
The ±0.1-0.3°C temperature have supported Max. 145°C fresh water can be controlled.
- High accuracy temperature controller and operation.
- Monitors temperature with 0.1°C resolution. Temperature Contoller with less than ±0.5°C resolution Attains 0.25sec of sampling cycle. New control algorithm to reduce transient overshoot.
- Machine maintenance made easier.
- The interior lay-out with a view to set into the molding machine
Almost pipe-less by utilizing manifold-block
Prevents water leak throughly
Heater Control with SSR (non-contact relay) - Operational temperature range max145°C(MCM-601S)
- Utilizes non-seal pump
The original interior structure corresponds to high temperature.
Allows flow performance.
Rack (Options) - About 50% Floor Space Saving.
- (W:500mm x L:710mm = 0.36m2)
can choose the set-up location freely.
Prevent falling down from flanges and fixed by anchor bolt.
Each Unit is fixed on Frame from bottom side with bolts.
Matsui – MCLX-HX
![MCLX-HX](https://easternplastics.co.uk/wp-content/uploads/2013/08/Mold-Temperature-Controller-2-150x150.jpg)
MCLX promotes stable temperature control and high level of safety for large flow rate.
- ■Pump Features
- Large flow rate and high pressure pump enhances performances and reliability.
●Customized mechanical seal increases shaft seal capacity and expands life-span of pump to allow operation in higher water temperature than other company models
●Pump structure that is resistant to water resldue.(impeller : stainless steel)
Matsui – MCHH
![MCHH, Matsui](https://easternplastics.co.uk/wp-content/uploads/2013/08/Mold-Temperature-Controller-High-Temperature-150x150.jpg)
Water (medium) can support high temperature of 160°C
Eliminates smell, dirtiness, medium disposal as do not using oil as medium.Environment friendly mold temperature controller
- 1,Built-in booster pump
- In order for the mold temperature controller to secure a stable inner pressure, MCHH is provided with an electric booster pump as standard equipment. It exerts stable cooling capacity when cooling down from high temperature.
- 2,Energy saving design
- It is designed for saving energy by starting the booster pump only when the medium is controlled at a temperature higher than 85
- 3,Prevents scaling
- Using indirect cooling method, pumps will not be damaged.
- 4,Enviroment friendry
- Since no oil is used, this is an environment-friendly mold temperature controller that dispenses with oil draining and eliminates oil evaporation during operation
- 5,Painting is redundant with the improvement of surface gloss
- It responds also to molding by heating and cooling. Moreover, it is best suited for molding engineering plastics that require a high molding temperature.
Matsui – MC (-5 L-H-A-X)
![MC (-5 L-H-A-X), Matsui](https://easternplastics.co.uk/wp-content/uploads/2013/08/Mold-Temperature-Controller-150x150.jpg)
MC provides stable temperature and high level of safety.
- 1.High Precision
- Display temperature of precision up to 0.1degrees.
Memory function that saves 2 different temperature for easy alteration. - 2.Reliable
- Heater control circuit uses SSR (non-contact relay).
Shunt-coil breaker shuts down power automatically upon excessive heating.